Caplum

•

DaVaR Specifications


		Specifications

		VDC				0 - 250V, +/-2%

		Resistance				0 - 5 ohms, +/-5%

		Capacitive Length				1-80,000 ft (20 km), +/-2%

		Load Coil Detection				Full (from MDF), quick on spares or workers

		DC Special Circuit Recognition				Yes

		Leakage Test				Up to 5 ohms, +/-10-20%

		Number Verification				With Smart-Pro or Talkback

		Dial and Feature Dial Tone Detection				Yes

		Special Service Protection				Yes

		Variable In-Circuit Parameters				Yes

		User-Defineable Voltage Ranges				Yes


		Basic NetDSL

		AC Voltage				0 to 250V (1% ± 0.5V accuracy)

		DC Voltage (RIN=100 kohms or 10 Mohms)				Range: 0 to 150V (1% ± 0.5V accuracy); 150 to 300V (2% accuracy)

		DC Loop Current (430 ohms)				0 to 100 mA (2% ± 0.3 mA accuracy)

		Resistance (shorts & grounds)				0 to 100 ohms (0.1% ± 0.10 ohm accuracy) 100 ohms to 1000 kohms (0.2% ± 0.10 ohm accuracy) 4 kohms to 999 Mohms (3% accuracy)

		Leakage Stress				2 kohms to 999 Mohms (3% accuracy)

		Opens				0 to 3000 ft (1% ± 5 ft accuracy) 3 to 50 kft (3% accuracy) 50 to 80 kft (5% accuracy)

		Splits				Range: 0 to 50 kft (Accuracy: 10% of Cable Length)



		Load Coils				0 to 6 (± 1 accuracy)

		Tracing Tone				Frequency: 577.5 Hz (0.1% accuracy) Range: > 15Vp-p (10% accuracy)

		VF Noise				Impedance: 600 ohms, Bridged (1% accuracy) Filters: C, CN, 3k, 15k, Psophometric Metallic Noise: 0 to 10 dBrn (± 2 dB accuracy); 10 to 100 dBrn (± 1 dB accuracy) Power Influence: 40 to 120 dBrn (± 2 dB accuracy)

		VF Loss				Signal Level: -40 to 10 dBm (± 0.5 dBm accuracy) Frequency: 100 Hz to 20 kHz (0.1% ± 2 Hz accuracy)

		VF Longitudinal Balance (0 to 70 dB ± 2 dB)				Disturbing Frequency: 200 to 2500 Hz (0.1% accuracy) Impedance: 600 ohms (1% accuracy) Filters: C, Psophometric


		NetDSL Wideband Option

		WB Noise/Level				Impedance Range: 100 ohms, 135 ohms, Bridged (1% accuracy) Filters: E, F, G, None Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Amplitude: -50 to 3 dBm (± 1 dB @ 135 ohms); -90 to -50 dBm (± 3 dB @ 135 ohms)

		WB Loss				Impedance: 135 ohms (1% accuracy) Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Magnitude: 0 to 50 dB (± 1 dB accuracy); 50 to 70 dB (± 2 dB accuracy)

		WB Longitudinal Balance (0 to 70 dB; ± 2 dB)				Disturbing Frequency: 10 to 1200 kHz (0.1% accuracy) Impedance: 100 ohms, 135 ohms (1% accuracy) Filters: E, F, G, None

		Send WB Tone				Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Amplitude (fixed): 0.0 dBm (± 0.5 dB accuracy) Impedance: 100 ohms, 135 ohms (1% accuracy)

		WB Impulse Noise				Impedance Range: 100 ohms, 135 ohms, Bridged (1% accuracy) Filters: E, F, G, None Test Time: 1 to 1440 Minutes (1% accuracy) Impulse Counter: 0 to 9999 Counter Threshold: -50 to 0 dBm (± 1 dB accuracy)

		ADSL Auto-Test				Impedance: 100 ohms Noise Filters: E, F, G, None ADSL Standard: ANSI, Full, G, Lite

		Data Rate Prediction				Resolution: 32 kb/s Downstream Rate Range: 0 to 8192 kb/s Downstream Rate Accuracy: ± 96 kb/s (3 units of resolution) Upstream Rate Range: 0 to 1024 kb/s Upstream Rate Accuracy: ± 64 kb/s (2 units of resolution)


		NetDSL TDR Option

		Impedance				135 ohms (1% accuracy)

		Pulse-width				20, 100, 500, 1000, 2500, 5000 ns (10% ± 5 ns accuracy)

		Vop Selection				0.300 to 0.999

		Range (Vop=0.64)				30,000 ft (9144m)

		Range Selection (Auto.)				10 ft to 48 kft (3 to 14630m)

		Horizontal Resolution				0.5 to 156 ft (0.1524 to 47.5m)

		Distance to Reflect.				Range: 0 to 30,000 ft (0 to 9144m) Accuracy: 1% ± Vop Uncertainty

		Vertical Gain				Range: 80 dB Accuracy: 2 dB

		Power Filter				5 kHz Highpass

		Averaging Filter				4x Waveform Avg.

		Input Protection				± 400 V pk